Filter
Top Products
20
EN
When the oven is working...
Interrupting a cooking cycle
You can stop the cooking process at any time by
pressing the Cancel key once or by opening the
oven door.
In both cases:
• Microwave emission is stopped
immediately.
• The grill is de-activated but is still very hot.
Danger of burning!
• The timer stops and the display shows the
remaining amount of operating time.
If you wish, at this time you can:
1. Turn or stir the food to ensure it will be evenly
cooked.
2. Change the process parameters.
3. Cancel the process by pressing the Cancel
key.
To restart the process, close the door and press
the Start key
Altering parameters
The operating parameters (time, power,
temperature) can be altered when the oven is
operating or when the cooking process has been
interrupted by proceeding as follows:
1. Select the parameter to be change with the
Parameter selection keys. The respective
symbol and the display start blinking.
2. Set the desired value with the “+” and “–” keys.
3. Press the Confirmation key or wait 3 seconds
to validate the new parameter value. The
display and symbols stop blinking.
Cancelling a cooking cycle
If you wish to cancel the cooking process, press
the Cancel key twice.
You will then hear a beep and the time will appear
on the display.
End of a cooking cycle
At the end of the process you will hear three
beeps and the display will show the word “End”.
The beeps are repeated every 30 seconds until
the door is opened or the Cancel key is pressed.