Filter
Top Products
FITTING AND PRODUCT DIMENSIONS
6
Fig. 1
DESN 512636
Any side wall above the cooker on either side shall be not less than 75mm (3”) horizontally from
the cooker (Fig. 1).
Combustible surfaces over the top of the cooker must not be closer than 28” and must not
exceed 13” in depth. (See Fig. 1).
A minimum clearance of 1000mm must be available at the front of the cooker to enable it to be
serviced.
The cooker must stand on a firm and level surface, we recommend that any soft material such
as linoleum is removed.
The vent slots in the back of the top plate must not be obstructed.