Filter
Top Products
Chapter 2 Operating Your Frequency Counter
Offsetting a Frequency Measurement
2-22 Operating Guide
2
3 Use the left- and right-arrow keys to move the focus to the digit(s)
in the frequency-offset display that you need to adjust to enter the
offset value, and then use the up- and down-arrow keys to adjust
the value for each digit. Enter a value of 500 Hz.
The flashing digit is the digit that currently has the focus. This means
that you can change the value of the flashing digit using the up- and
down-arrow keys.
4 Press the sign (+/–) key (if desired) to change the sign of the offset
value.
The display should look like this:
5Press the Enter key to confirm the offset value and exit the
offset-entry display.
The Freq Offset annunciator is deactivated, and the measurement
display returns.
NOTE When you are entering a value for Frequency Offset (or Power Offset),
you can use the Reset key to restore all of the displayed digits to zero.
These are the only two functions in which the Reset key has this effect.
GHz
MHz
kHz
Hz
Ch 1
Rel
Rel
Freq
Offset