Filter
Top Products
C A R E A N D C L E A N I N G
ASC-2E & ASC-4E Electric Convection Ovens - Manual Control • 17
E
XT ER IO R:
To help maintain the protective film coating on
polished stainless steel, clean the exterior of the
cabinet with a cleaner recommended for stainless
steel surfaces. Spray the cleaning agent on a clean
cloth and wipe with the grain of the stainless steel.
Wipe control panel, door vents and door handles,
thoroughly since these areas harbor food debris.
Clean exterior glass surfaces with a commercial
window cleaner.
DO NOT USE ABRASIVE CLEANING COMPOUNDS.
MO TO R C AR E
The convection oven motor contains self-
l
ubricating, sealed ball bearings and is
generally maintenance-free. During operation,
the interior of the motor is cooled by air flowing
into the rear of the motor case. This is a general
operating feature when proper clearances have
been allowed.
A T T H E E N D O F T H E D A Y ,
U T I L I Z E T H E C O O L - D O W N M O D E
A N D O P E N T H E O V E N D O O R S .
T R O U B L E S H O O T I N G G U I D E
S E R V I C E
TROUBLE POSSIBLE CAUSE REMEDY
Oven has no power • Insufficient power supply
• Defective power cord or plug
• Defective power switch.
• Loose electrical connection
• Check power source.
• Check and replace if necessary.
• Check and replace if necessary.
• Check all electrical connections
Cook temperature
too high/low
• Thermostat out of calibration
• Defective thermostat
• Check Calibration using a digital
thermometer in the center of the
cavity. Calibrate if necessary
• Replace thermostat
Cook temperature too low • Defective door gasket
• Door not closing properly
• Replace Gasket
• Check latches on the top and
bottom of door.
Fan not running • Door switch defective or out of adjustment
• Motor switch tripped (2E only)
• Door not closing properly
• Adjust or replace
• Reset, Black button should
be pushed in
• Check latches on the top and
bottom of door.
Fan running but no heat • High limit tripped
• Defective element
• Reset high limit and test temperatures
• Replace element
Fan runs with door open • Door switch defective or out of adjustment • Adjust or replace