Filter
Top Products
Electric Fryer Operation & Care Manual • 22
DELUXE CONTROL OPERATION
Electric Fryer Operation & Care Manual • 22
DELUXE CONTROL OPERATION
Start a Cook Cycle
Press any product key to start a cook cycle. If the key is
programmed, the cooking time will be displayed and
will immediately start to count down in minutes
and seconds. DONE will display when the cook cycle
has ended.
The pressure solenoid will also close if programmed to
do so, or a basket lift will lower if so equipped.
If DONE is displayed immediately and the unit starts
to beep, the product key being pressed is not
programmed.
Stop a Cook Cycle
Press and hold an active product key for 3 seconds.
Timing will stop, and basket will lift is so equipped.
Respond to a DONE Alarm
Cancel the signal by pressing the same product key
used to start the cook cycle.
Action Alarms
If the controller is programmed for action alarms, they
will signal at a preset time during the cooking cycle. The
signal, a dual-rhythm beeping, will last 5 seconds and
then self-cancel. The display will flash the action alarm
time and the controller will start counting toward 0:00 .
Holding Timers
If the product menu is programmed with holding
times, they will automatically start counting upon
expiration of the cooking cycle.
When there are active hold times, the HOLD indicator
light will be lit.
To View All Active Hold Times , press and hold the
HOLD key. Upon expiration, the timer will display HOLD
and pulse with a beep.
To Cancel, press the HOLD key.
OPERATING THE CONTROL
PRODUCT
KEY
Press any product key to start a cook cycle. If the key
is programmed, the cooking time will be displayed
and will immediately start to count down in minutes
and seconds. DONE will display when the cook cycle
has ended.
The pressure solenoid will also close if programmed
to do so, or a basket lift will lower if so equipped.
If DONE is displayed immediately and the unit
starts to beep, the product key being pressed is
not programmed.
Press and hold an active product key for 3 seconds.
Timing will stop, and basket will lift if so equipped.
Cancel the signal by pressing the same product key
used to start the cook cycle.
If the controller is programmed for action alarms, they
will signal at a preset time during the cooking cycle.
The signal, a dual-rhythm beeping, will last 5 seconds
andthenself-cancel.Thedisplaywillashthe
action alarm time and the controller will start counting
toward 0:00.
If the product menu is programmed with holding
times, they will automatically start counting upon
expiration of the cook cycle.
Whenthereareactiveholdtimes,theHOLDindicator
light will be lit.
To view all active hold times, press and hold the
HOLD key. Upon expiration, the timer will display
HOLD and pulse with a beep.
To Cancel, pres the HOLD key.