Filter
Top Products
13
Fresh Food Features
Note: For best results, keep the crispers tightly
closed.
To Remove:
• Pull drawer out to full extension. Tilt up front of
drawer and pull straight out.
To Install:
• Insert drawer into frame rails and push back into
place.
Storage Drawers
Snack Drawer (select models)
The Snack Drawer can be used for
storage of miscellaneous items or
extra produce.
To Remove:
• Pull drawer out to full extension. Tilt up front
of drawer and pull straight out.
To Install:
• Insert drawer into frame rails and push back into
place.
Crisper Drawers
The Crisper Drawers provide a higher humidity
environment for fresh fruit and vegetable storage.
Controls
The Crisper Controls regulate the amount of humidity
in the crisper drawer. Slide the control toward the low
setting for produce with outer skins. Slide the control
toward the high setting for leafy produce.
Beverage Chiller™
(select models)
The Beverage Chiller™ keeps
beverages and other items cooler
than the rest of the fresh food
section. A cold air inlet allows air from the freezer
section to pass into the beverage chiller.
The Beverage Chiller™ control is located
on the left wall of the fresh food
compartment. The control adjusts the
amount of cold air allowed in to the
beverage chiller. For a cooler temperature
in the Beverage Chiller™, slide the control
down.
To Remove:
• First remove the pick off
shelf to the left of the
Beverage Chiller™.
• Firmly hold each side of
beverage chiller, lift up
and away from door liner.
To Install:
• Reverse above procedure.
Note: Cold air diverted into the Beverage Chiller™
can decrease the main refrigerator temperature.
Refrigerator control may need to be adjusted.