Filter
Top Products
12
Using the Oven Control
Setting Electronic Clock
12 hour clock does not display AM, PM or military time. When power is
connected or restored, display flashes until CLOCK or CANCEL pad is
pressed.
1. Press CLOCK pad.
TIME displays.
2. Press MORE or LESS pads until correct time
of day displays.
3. Press OVEN CANCEL pad to set time, or time
is set after 30 seconds of no adjustment.
Setting Minute Timer
Timer is a timer only. Electronic timer does not control bake, broil or
self-clean function. Timer can be set from 5 seconds up to
9 hours and 50 minutes.
1. Press TIMER ON/OFF pad.
TIMER displays.
2. Press MORE or LESS pads until desired time
displays.
Timer begins counting down automatically
after time is entered.
3. Press and hold TIMER ON/OFF pad for 3
seconds to cancel timer signal.
After time elapses, timer beeps three tones, and then once
approximately every 6 - 8 seconds until CANCEL is pressed.
Resetting and Canceling Timer
To cancel timer when remaining time is displayed or when signal is
beeping, press and hold TIMER ON/OFF pad for approximately
3 seconds DO NOT press OVEN CANCEL pad. CANCEL will stop all
cooking functions if the oven is in use.
Flashing Display
When power is connected
or interrupted, oven display flashes.
Press CLOCK to reset display.
Clock may need to be reset.
Timer Signal
When time elapses, timer will sound
three one-second beeps and then once
every 30 seconds. END also displays.
Press TIMER ON/OFF pad to stop timer
and return to clock display.