Filter
Top Products
12
Before Using
Connecting Power
When unit is plugged in or powered after the loss of
electricity, it will take several seconds before dashes and
menu indicator display. Once displayed, unit is
operational.
Interrupting Operation
Open oven door to interrupt operation. Oven fan
continues to operate. Close door and press
START pad to resume oven operation.
Press STOP/RESET pad to interrupt operation.
Display continues to show countdown time. Press
START pad to resume oven operation and countdown
timing. If preset pad is pushed immediately after door
is opened and closed, a slight delay occurs before
oven starts and timing countdown begins.
Display
"EOC" (End of Cycle) Lights at end of cooking cycle. Remains lit until door is opened, or
STOP/RESET pad is pressed.
"PAUS" (Pause) Lights during cooking pause.
"P" Displays at programming entry point (as soon as programming mode is
entered). Lights when viewing stage with an enabled pause.
"POWER" Lights when microwave power is supplied to oven.
"COOK LEVEL" Lights when viewing stage with reduced power or hold. Power level digit or H
for hold display.
"MENU 1-4" Lights active menu.
"ITEM" Lights when number is pressed to select item.
"LMT" (Limit) Flashes when either user time limit or maximum time limit is exceeded.
"QTY" (Quantity) Flashes until desired quantity is entered or short period of time elapses.
Continuously lights during cooking cycle when quantity greater than one is
selected.
"STG" (Stage) Lights in programming mode when multiple cooking stages exist for selected
item.
ITEM
88
ADD DEL
STG QTY
2
3
4
P
8
LMT
88 88
MENU1 MENU2 MENU3 MENU4
POWER
8
COOK
LEVEL
Canceling Mistakes
If oven is not operating, press STOP/RESET pad to
clear display.
If oven is operating, press STOP/RESET pad once to
stop oven, then again to clear display.
If oven door is open and time shows in display, close
oven door and press STOP/RESET pad to clear
display.