Filter
Top Products
Part No.12392604
Printed in U.S.A.
10/97 Amana Appliances
Amana, Iowa 52204
Quick Reference Instructions
Read “Important Safety Information” before using “Quick
Reference Instructions”. If there are unanswered questions,
see detailed sections of this manual.
Operating Preprogrammed Pads
1. Open oven door, place food in oven, and close door.
2. Press
MENU
pad to select preprogrammed menu if
necessary.
3. Press desired number pad.
4. Oven stops heating and oven signal sounds when
heating timing elapses.
Reviewing Preprogrammed Pads
1. Open oven door.
2. Press and hold
TIME ENTRY
pad for approximately
15 seconds.
3. Press
MENU
pad to select preprogrammed menu if
necessary.
4. Press desired number pad.
5. Press
TIME ENTRY
pad to review heating stages for
pad.
6. Press
START
pad after reviewing preprogrammed
pad.
7. Press
RESET
pad or close oven door to exit
programming mode.
Manual Time Entry
1. Open oven door, place food in oven, and close door.
2. Press
TIME ENTRY
pad.
3. Press number pads to enter desired cooking time.
4. Press a power level pad if power level less than 100
percent is required.
5. Press
START
pad.
6. Oven stops heating and oven signal sounds when
heating timing elapses.
Programming Preprogrammed Number Pads
1. Open oven door.
2. Press and hold pad
1
for approximately 15 seconds.
3. Press
MENU
pad to select preprogrammed menu if
necessary.
4. Press desired number pad.
5. Press number pads to enter desired cooking time.
6. Press a power level pad if power level less than 100
percent is required.
7. Press
START
pad to save new heating time and
power level in oven memory.
8. Press
RESET
pad or close oven door to exit
programming mode.
Programming Multiple Heating Stages
1. Open oven door.
2. Press pad
1
for approximately 15 seconds.
3. Press
MENU
pad to select preprogrammed menu if
necessary.
4. Press desired number pad.
5. Press number pads to enter desired cooking time.
6. Press a power level pad if power level less than 100
percent is required.
8. Press
TIME ENTRY
pad.
9. Press
START
pad to save new heating time and
power level in oven memory.
10. Press
RESET
pad or close oven door to exit
programming mode.
Programming Deactivating Control Panel
1. Open oven door, and close oven door.
2. Press
TIME ENTRY
pad.
3. Press
1,3,5,
and
7
pad in sequence.
4. Press
TIME ENTRY
pad.
Deactivating Preprogrammed Pad
1. Open oven door.
2. Press and hold pad
1
for approximately 15 seconds.
3. Press desired number pad.
4. Press hidden pad.
5. Press
START
pad to save in oven memory.
6. Press
RESET
pad or close oven door to exit
programming mode.
Reactivating Preprogrammed Pad
1. Open oven door.
2. Press and hold pad
1
for approximately 15 seconds.
3. Press desired number pad.
4. Press hidden pad.
5. Program pad according to “Preprogrammed Number
Pads” section step 5-8.
6. Press
START
pad to save in oven memory.
7. Press
RESET
pad or close oven door to exit
programming mode.
User Options
1. Open oven door.
2. Press and hold pad
1
for approximately 15 seconds.
3. Press hidden pad.
4. Press
START
pad to advance to next option. See
table for options.
5. Press number pad (0,1-3) to change option.
6. Press
START
pad to save changes.
7. Press
RESET
pad or close oven door to exit
programming mode.