Filter
Top Products
AP120BC1000-3/ AP120BCF1300-3 Manual
16
g. To set the day, press or then press
.
03(day)
Blinks
h. To set the hour, press or (be sure to
continue to press the buttons until the hour and "AM"
or "PM" show correctly) then press
.
10(hours)
Blinks
i. To set the minutes, press or then press
.
25(minutes)
Blinks
j. To change the number of probes, press or
then press .
3 Blinks
The high air alarm temperature should be left at
140
o
F. However, if a change is desired:
k. To change the temperature, press
or
then press
.
140 Blinks
The low air alarm temperature should be left at
-35
o
F *. However, if a change is desired:
l. To change the temperature, press
or
then press
.
-35 Blinks
*- 35
o
F for shock freezers (AP120BCF1300-3)
- 5
o
F for blast chillers (AP120BC1000-3)
m. To change the number of probes, press or
then press .
1 Blinks
NOTE: Standard configuration has only one food probe. However, a maximum of 4 probes can
be used with these models
INITIAL PROGRAMMING
SET TIME
10:25 AM
INITIAL PROGRAMMING
SET TIME
10:25 AM
INITIAL PROGRAMMING
SET DAY
03
.
The high food alarm temperature should be left at
180
o
F. However, to make a change:
n. To change the temperature, press
or
then press
.
180 Blinks
INITIAL PROGRAMMING
FOOD PROBES NUMBER?
1
INITIAL PROGRAMMING
HIGH FOOD ALARM
180 °F
INITIAL PROGRAMMING
LOW AIR ALARM
-35 °F *
INITIAL PROGRAMMING
HIGH AIR ALARM
140 °F
INITIAL PROGRAMMING
AIR PROBES NUMBER?
3