Filter
Top Products
AP120BC1000-3/ AP120BCF1300-3 Manual
17
:
The low food alarm temperature should be left at
35
o
F. However, to make a change
o. To change the temperature, press
or
then press
.
35 Blinks
p. To change to YES or NO, press or then
press
.
YES Blinks
* YES for shock freezers (AP120BCF1300-3)
NO for blast chillers (AP120BC1000-3), and go to step r.
q. To change the temperature, press or
then press
.
-5 Blinks
r. To change to YES or NO, press or then
press
.
NO Blinks
s. Press or to change to NO then press
.
NO Blinks
t. To change to YES or NO, press or then
press
.
NO Blinks
For YES, the display will show:
The P.C. baud rate should be left at 38400.
However, to make a change:
u. To change the baud rate, press
or then
press
.
38400 Blinks
v. To change the number (between 01 & 32), press
or then press .
01 Blinks
w. To change to YES or NO, press or then
press
.
NO Blinks
INITIAL PROGRAMMING
UV CYCLE?
NO
INITIAL PROGRAMMING
SHOCK FREEZE
LOW FOOD ALARM
-5 °F
INITI
A
L PROGRAMMING
SHOCK FREEZE?
YES *
INITIAL PROGRAMMING
SOFT & HARD
LOW FOOD ALARM
35 °F
INITIAL PROGRAMMING
PRINTER CONNECTION?
NO
INITIAL PROGRAMMING
CHILLER NETWORK ID
# 01
INITIAL PROGRAMMING
PC BAUDRATE
38400
INITIAL PROGRAMMING
PC CONNECTION?
NO
INITIAL PROGRAMMING
THAWING CYCLE
THAW CYCLE?
NO