Filter
Top Products
INSTALLATION
7
PHOTO #2
3. Seal the spaces between frames and side box panels by
tightening the butterfly ¼” nuts on the provided seal
brackets (see PHOTO #3 page 8).
4. Make the electrical connections (page 8) and install the
refrigeration unit (page 13).
5. Lower the ceiling panel over the Coil Assembly Frame
and secure the ceiling to the fans top filler panel with 8/32”
bolts in the predrilled holes (see DRAWING # 5 & PHOTO
#2). Drill holes in the coil side of the ceiling through the coil
filler and secure with self-taping 8/32” stainless steel
screws.
DRAWING # 5