Filter
Top Products
Installation Instructions
4.2 Interchange hinge and screws at top right with
screws at top left of cabinet. Do not tighten screws
on hinge side at this time.
NOTES:
• Some hinges have four holes. Which holes you
use for installing the hinge depends on which
side you install the hinge.
• The outer edge of the hinge should be parallel
to the edge of the case for correct installation.
Installing the hinge on the left.
Installing the hinge on the right.
REVERSING THE DOOR HANDLES
5
5.1.2 Remove the handle.
5.1.3 Remove the screws from the right edge of the
door top and insert them into the handle screw
holes on the opposite side.
Top
Screws
for Handle
Holes
Plug
13
REVERSING THE HARDWARE
(CONT.)
4
5.1 Transfer fresh food door handle
5.1.1 Remove the handle plug using a tape-tipped
putty knife under the edge, and remove the
screw underneath. Remove the two screws
holding the handle to the top of the door.
5.3 Reinstalling the Fresh Food Door
Handle
5.3.1 Attach the handle to
the right side of the
door with screws at
the top and under
the handle plug.
5.3.2 Reinstall the
handle plug.
5.1.4 Remove plug button from the top hinge hole on
the left side of the door and insert it into the hole
on the opposite side that was vacated by removal of
the top hinge.
Plug Button
5.1.5 Pull the plug button from the front of the door
and transfer it to the opposite side.
5.2 Transfer door stop
5.2.1 Move the metal or plastic door stop and
screws from the right side to the left side.
To reattach the
handle on the
opposite side.
Plug Button
Metal Door Stop
Left Side
REVERSING THE DOOR
HANDLES
(CONT.)
5
Right Side
Plastic Door Stop
Left Side
Right Side