Filter
Top Products
NA
21
function
SHOW CLOCK TIME *
ON
Save using the key.
! Note: the time is only displayed at certain times. This
function can only be disabled by the user.
To disable this function, use the
key to choose:
SHOW CLOCK TIME *
OFF
Save using the key.
Regulating on/off times
The machine can be programmed to switch on and off
automatically. Only one “on” time and one “off” time
can be programmed on the machine.
! Note: this function is enabled only if the main switch
is in the “I” position (on).
Use the
key to select this function:
ON/OFF TIME *
SHOW CLOCK TIME
Enable it with the key.
ON/OFF TIME
ON TIME 0:00
Set the “on” time by pressing the key and save
using the
key.
Next, press the
key to set the minutes and
save using
key.
ON/OFF TIME
OFF TIME 0:00
Set the “off” time by pressing the key and save
using
key.
Next, press the
key to set the minutes and
save using
key.
! Attention: if the on and off times coincide, the
machine ignores both settings. The clock must be
enabled after this programming in order to function
correctly.
To enable automatic on/off
! Note: this function is enabled only if on/off times has
been programmed.
Use the
key to select this function:
AUTOMATIC ON/OFF *
CLOCK TIME
Enable it with the key.
AUTOMATIC ON/OFF
NO
In this case disables this function.
Enable the function with the
key and when the
display shows
AUTOMATIC ON/OFF
YES
save using the key.
Check the parameter settings when exiting
programming. If the current time falls within the
disabled period the display shows:
STANDBY
! Note: during the disabled phase the machine may
be reactivated at any time by pressing the
key. To
disable the machine again, go into programming by
pressing
and exit immediately by pressing the
key.