Filter
Top Products
ASUS P2L97 User’s Manual 49
IV. BIOS SOFTWARE
IV. BIOS
(Power Management)
PWR Up On Modem Act (Enabled)
This allows either settings of Enabled or Disabled for powering up the computer
(turns the ATX power supply on) when the modem receives a call while the com-
puter is off. NOTE: The computer cannot receive or transmit data until the com-
puter and applications are fully running, thus connection cannot be made on the first
try. Turning an external modem off and then back on while the computer is off
causes an initialization string that will also cause the system to power on.
AC PWR Loss Restart (Disabled)
This allows you to set whether you want your system to boot up after the power has
been interrupted. Disabled leaves your system off after reapplying power and En-
abled boots up your system after reapplying power.
Wake On LAN (Enabled)
Enable allows the ASUS PCI-L101 fast Ethernet card to power up the system using
the proper software. Disable turns off this feature.
Automatic Power Up (Disabled)
This allows you to have an unattended or automatic power up of your system. You may
configure your system to power up at a certain time of the day by selecting Everyday,
which will allow you to set the time or at a certain time and day by selecting By Date.
.....................................................................................................................................
Fan Monitor (xxxxRPM)
The onboard hardware monitor is able to detect the Chassis Fan Speed, CPU Fan
Speed, and the Power Supply Fan Speed in Rotations Per Minute (RPM). Set to
Ignore if one of these are not used so that error messages will not be given.
.....................................................................................................................................
Thermal Monitor (xxxC/xxxF)
The onboard hardware monitor is able to detect the CPU (thermal-sensing heatsink
required for Pentium II processor) and MB (motherboard) temperatures. Set to Ig-
nore if unavailable.
.....................................................................................................................................
Voltage Monitor (xx.xV)
The onboard hardware monitor is able to detect the voltages put out by the voltage
regulators. Set to Ignore if unavailable.
NOTE: If any of the monitored items are out of range, an error message will appear:
“Hardware Monitor found an error, enter POWER MANAGEMENT SETUP for
details”. You will then be prompted to “Press F1 to continue, DEL to enter SETUP”.