Filter
Top Products
10
Floorboard Style Modelers
RETURN
SEND - L
EFFECTS
LOOP
SEND - R
MODEL REACTOR 112
Atomic Amplifiers LLC.
Orange CT.
FUSE
0101010101
!CAUTION!
RETURN
SEND - L
EFFECTS
LOOP
SEND - R
MODEL REACTOR 112
Atomic Amplifiers LLC.
Orange CT.
FUSE
0101010101
!CAUTION!
Using two
Reactor 50
112/212s Install
blank templates
onto the DS-1
docking units.
Replace the DS-1’s back
into the docking bays
located in the top of the
Reactors making sure that
the dock locks click into
position.
Plug the Left and Right
outputs of your Foot
Controller style modeler
or preamp into the pair
of R eactor’s R E TU R N
inputs.
If using outboard effects
pedals or devices with your
modeler, connect them as
normal per the
m anu facturer’s in stru ctions.
It is a good idea to
make sure the output
levels are turned
down on your
modeler.
Tu rn the m od eler’s
power on.
Turn the Reactors power switches
to the ON position (they should
light up).
Bring up the levels on your modeler and
switch to some of your favorite presets.