Filter
Top Products
24
ቦ
CORRECT REPLACEMENT
OF THE BURNERS
It is very important to check that the
burner flame spreader “F” and the cap
“C” have been correctly positioned (see
figs. 5.1 and 5.2 ).
Failure to do so can cause serious
problems.
In appliances with electric ignition, check
that the electrode “S” (fig. 5.1) is always
clean to ensure trouble-free sparking.
The ignition plug must be very
carefully cleaned.
CORRECT POSITION OF
TRIPLE RING BURNER
The triple ring burner must be correctly
positioned (see fig. 5.3); the burner rib
must be fitted in their housing as shown
by the arrow.
The burner correctly positioned must not
rotate (fig. 5.4).
Then position the cap A and the ring B
(fig. 5.4 - 5.5).
Fig. 5.2
Fig. 5.1
S
F
C
Fig. 5.5
Fig. 5.3
A
B
Fig. 5.4
Safety catch
Fig. 5.6
OVEN SHELF INSTALLATION AND REMOVAL
The oven shelves are provided with a security block to prevent accidental extraction.
They must be inserted operating as per figure 5.6.
To pull them out remove shelf in the inverse order.
Keep attention to insert the shelves correctly (see side figure).
GAS VALVES
✓ In the event of operating faults in
the gas valves, call the AVANTI
Service Department.