West Bend Back to Basics SR1000 Blender User Manual


 
9
ADD LIQUIDS
The
AutoS
erve Smoothie
Maker
mixing container is conveniently marked to create
perfect smoothies. To make your favorite frozen drinks, follow these simple steps:
ADD LIQUIDS
Add any combination of liquid ingredients up to the
LIQUIDS
mark on the mixing
container under
SERVES
2 or SERVES 4
. Liquids include any soft ingredients such
as fruit, milk, fruit juice, herbal supplements or yogurt in any combination you think
would be tasty.
We are, of course, partial to the Back to Basics
smoothie mixes, which quickly and
easily make three delicious 8-ounce smoothies.
ADD ICE
Add ice or
frozen ingredients
until the total level reaches the
FROZEN
INGREDIENTS
line on the side of the mixing container. Frozen ingredients include
ice, frozen fruit, frozen yogurt, ice cream, etc.
SMOOTH IT
With the lid locked into place and the stir stick set in the hole on the lid, pulse the
mixture 2 or 3 times by pushing the
PULSE
button
.
Next, push the LOW button
and
mi
x for 20-30 sec
onds. Push the HIGH button for the final 10-15 seconds of
mixing.
Turn the stir stick counter-clockwise for best mixing results.
OPERATION
AutoServe Smoothie Maker
Control Switches
OFF
shuts off the
machine.
HIGH
runs the
unit
at high speed. This
speed should be used for the final
stages of mixing.
LOW
runs the
unit
at low
speed. This speed should
be used for the initial 30
seconds of mixing
.
PULSE
gives short bursts
of power at high speed.
Use PULSE to begin the
mixing of ice and other
hard ingredients.
NOTE
:
Dispense speed automatically engages
when dispensing button is pushed.
R
EADY
LIGHT
Indicates
that the power is on
and
the machine is re
ady
for use.