Filter
Top Products
Convection Oven Maintenance
11
Maintenance
Failure to comply with the maintenance below could result in a serious accident.
Electrocution, equipment failure or property damage could result if an unlicensed
electrician performs electrical repair. Ensure that a licensed electrician performs
electrical repair.
Routine Maintenance
Before performing maintenance, unplug the oven.
During cleaning, use protective gloves, mask and garments as required by
standards.
At the end of each workday clean the inside of the oven with appropriate
convection ovens following the suggestions of your supplier. Do not use
corrosive or acidic convection ovens, or convection ovens which are not suitable
for this type of cleaning.
To make cleaning easier, remove the lateral diffusers by lifting them slightly so
they are free of the holding pegs.
Clean the stainless steel parts daily with lukewarm soapy water, and rinse
thoroughly. Then dry.
Absolutely do not clean the stainless steel with steel wool or common steel
brushes, since they may leave ferrous particles which may oxidize, thus causing
rust spots.
Stainless steel wool can be used in the direction of the satin finish.
If the oven is not used for long periods, use a cotton ball to lay a coat of
petroleum jelly on all surfaces; also regularly ventilate the rooms.