Filter
Top Products
Convection Oven Maintenance
17
Electro-Mechanical Controls
All the electric components are visible. To replace them it is necessary to disconnect the attachments,
remove the knobs, unscrew the fastening screws or nuts and replace them.
For the adjustable thermostat, safety thermostat and thermometer, unscrew the
guard and the supports and remove the bulbs. Once they have been replaced use
high-temperature resistant silicone to seal the holes. After replacement, reseal the
holes for the passage of the capillaries with high temperature silicone.
Chamber Face Gasket
It is simply pressed in. Pull to remove it. NB: Before removing it, note its position carefully so as to place
the new one in the same position.
Replacement of Chamber Light and Glass Gasket
Check and replace the glass gasket and any lights in the oven chamber.