Filter
Top Products
10 / 11 EN
Hood / User Manual
5 Maintenance
5.1 Grease Filters
5.1.1Cleaning Metal Self- Supporting
Grease Filters
• The filters must be cleaned every 2 months, or
more frequently in case of particularly heavy
use of the hood. Filters can be washed in a
dishwasher.
• Pull out the sliding suction panel.
• Remove the filters one by one, after having dis-
connected the relative fastening elements.
• Wash the filters, taking care not to bend them.
Let them get dry before refitting them. (The co-
lour of the filter surface may change throughout
the time but this has no influence to the filter
efficiency).
• When refitting the filters, make sure that the
handle is visible on the outside.
• Close the sliding suction panel.
5.2 Charcoal filter (Recycling version)
5.2.1 Replacing Charcoal Filters
A
Warning: Turn the lights off and wait
until the lamps cool down before you
change the odour filter.
• These filters are not washable and cannot be
regenerated, and must be replaced approxima-
tely every four months or more frequently by
particularly heavy use.
• Pull out the sliding suction panel.
• Remove the grease filters.
• Remove the saturated carbon filter by releasing
the fixing hooks
• Fit the new filter by hooking it into its seating.
• Replace the grease filters.
• Close the sliding suction panel.