Beko DFN 1000 X Dishwasher User Manual


 
22
GB
Starting Your Machine
• Open the tap.
• Plug the mains plug into the wall
socket.
• Open the door.
• Press On/Off button.
• Check if the salt and rinse aid
indicators light and add salt and/or
rinse aid if needed.
• Place the dishes.
• Check if the upper and lower
impellers rotate freely.
• Put sufcient amount of detergent
in the detergent dispenser and
close its lid.
• Start the programme by pressing
Start/Pause/Cancel button.
WARNING:
Pay attention not to open the door of
the machine when it is running. Stop
the machine by pressing Start/Pause/
Cancel button if you have to open the
door. Then, open the door. There may
be a rush of vapor when you open
the door of your machine. Be careful.
Close the door and press Start/Pause/
Cancel button again. Programme will
resume running.
• Key lock will be activated 30
seconds after the programme
starts and ”Key Lock Activated” will
be displayed.
• Energy saving system will be
activated 90 seconds after the
programme starts and the display
is dimmed. If you touch the button
again, display brightness returns
to its original status.
• “End” will be displayed when the
programme is over. The amount of
water and energy consumed will
be displayed consecutively.
• Press the On/Off button to turn
off your machine when the
programme is over.
• Close the tap.
• Unplug the mains plug from the
wall socket.
• Leave your dishes in the machine
for about 15 minutes after they
are washed in order to have them
cooled down. Your dishes will dry
in a shorter time if you leave the
door of your machine ajar during
this period. This will increase
the drying effectiveness of your
machine.
Selecting the Reference
Programme
• Press the On/Off button to turn
on your machine when its door is
open. Then, press the Start/Stop
button for 10 secs.
• “Settings” will be displayed and
countdown will start from 10 secs.
• You will enter in the “Settings”
menu at the end of the countdown
and the language selection menu
“Language” will be displayed.
• “Ref. Programme” will be
displayed when you press the
Start/Stop button once.
• Press and hold the Start/Stop
button for 5 secs to enter the
reference programme menu.
• Press the Start/Stop button to
display ON or OFF options.
• Press and hold the Start/Stop
button for 5 secs to save your
selection. “Saved” will be
displayed.
• Turn off the machine by pressing
the On/Off button to exit the menu.
• Turn on your machine by pressing
the On/Off button to return to the
washing display.