Beko DFN 1000 X Dishwasher User Manual


 
23
GB
• When you press Start/Stop button,
reference programme will start.
• After wash cycle ends, if you want
to run the reference programme
again, apply the same procedure.
Key Lock
Your machine is equipped with a key
lock function in order to avoid anyone
else but you, particularly the children,
to interfere with and change the
programme ow while the machine is
operating. Key lock also functions as a
safety system that prevents you from
performing accidental operations by
pressing a button unintentionally when
you want to add or take out dishes
from the machine.
Key lock is activated automatically in
the following conditions:
• 30 seconds after the machine is
turned on by pressing the On/Off
button and the programme is
started
• If the programme does not start
within 30 seconds after the
machine is turned on by pressing
the On/Off button
• If you wait more than 30 seconds
when the machine is stopped
during washing
Key lock is deactivated automatically
when the programme is over: If you
press the touch-key at the end of
the programme, machine will display
the “Press to wash” message. If the
machine is left to wait in this status,
key lock will be activated after 30
seconds and “Key Lock Activated” will
be displayed.
If you press the button when the key
lock is active, “Key Lock Active” is
displayed and if you press the key
for a second time, “Press for 5 sec”
is displayed. You must press Start/
Pause/Cancel key until the “Key Lock
Deactivated” message is displayed to
deactivate the key lock.
When you keep the Start/Pause/
Cancel key pressed, the countdown
of 5 seconds starts and the following
messages are displayed consecutively:
“Unlock the keylock 5”
“Unlock the keylock 4”
“Unlock the keylock 3”
“Unlock the keylock 2”
“Unlock the keylock 1”
“Keylock deactivated”
Key will remain locked if you
release the key before the “Keylock
deactivated” is displayed. Key lock
is deactivated when the “Keylock
deactivated” message is displayed.
You can press the Start/Pause/Cancel
key to perform the operation you want
after the key lock is deactivated.
Stopping the machine
Deactivate the key lock rst if you
want to add/take out dishes to/from
the machine before determining the
level of washing. Then, you can stop
the washing by pressing the Start/
Pause/Cancel key again. In this, case,
following messages will displayed
consecutively:
“Paused”
“Press to continue”
Press the Start/Pause/Cancel button
again to deactivate the key lock and
resume the programme if the key lock
is activated after you have completed
your operation.