Filter
Top Products
EN
12
4 Before operating
Final Check
Before you start using the fridge/
freezer check that:
1. The feet have been adjusted for
perfect levelling.
2. The interior is dry and air can circulate
freely.
3. Clean the interior as recommended
under “Cleaning And Care.”
4. Insert the plug into the wall socket
and switch on the electricity supply.
When the door is open the interior
light will come on.
5. You will hear a noise as the
compressor starts up. The liquid and
gases sealed within the refrigeration
system may also give rise to noise,
whether the compressor is running or
not which is quite normal.
6. Slight undulation of the top of the
cabinet is quite normal due to the
manufacturing process used, so do
not worry, it is not a defect.
7. We recommend that you set
the thermostat knob at 3 (three)
and monitor the temperature to
ensure the appliance maintains
desired storage temperatures (See
section Temperature Control and
Adjustment).
8. Do not load the appliance
immediately it is switched on. Wait
until the correct storage temperature
has been reached. We recommend
that you check the temperature
with an accurate thermometer
(see; Temperature Control and
Adjustment).
9. Important Note :Ice formation at the
back is normal, do not worry. (See
Defrosting)