Filter
Top Products
USING THE INDUCTION HOB
Troubleshooting with the Induction Hob
Code Problem Possible Cause Solution
Hob is not working Child lock is activated Deactivate child
in display lock
Power boost not The appliance is hot, power Allow the
working boost is deactivated when the appliance to
appliance is hot to protect cool
the electronics and prevents
pans from overheating
ER21 Control unit cuts off Electronics overheating Allow the
after program setting appliance to
cool
ER400 Check mains
cable connection
and terminals at
the terminal block
are wired
correctly
E2 Overheating of Pan overheating Remove pans and
induction coil allow to cool
E8 Fan blocked or Fan inlets are blocked or Clean fan inlet
faulty faulty fans at the rear of the
appliance
15