Filter
Top Products
Glass parts
FACIA PANEL, DOOR PANELS
Use a mild cream cleaner - eg; “Cif”.
Rinse thoroughly and dry with a soft
cloth.
Impor tant: The inner door glass
panel(s) can be removed for cleaning,
but they must be replaced the right
way (so the reflective side faces
inwards) and also pushed fully in to
the stop position. To remove the glass
panel, open the door wide, hold the
edges of the glass and slide out.
Painted, plastic and metal finish
parts (if fitted)
CONTROL KNOBS, DOOR HANDLES
Only use a clean cloth wrung out in
hot soapy water.
Chrome plated parts
OVEN SHELVES & OVEN SHELF RUNNERS,
GRILL PAN TRIVET
Do not use abrasives or polishes, use
a moist soap pad - eg; “Brillo”.
Note: Oven shelf runners can be
removed for cleaning. Grasp the
runners, and slide out of the hanging
holes as shown.
Note: These items may also be
cleaned in a dishwasher.
Stainless Steel surfaces
(stainless
steel finish models only)
HANDLES, DOOR PANELS
Only use a clean cloth wrung out in hot
soapy water, and dry with a soft cloth.
Do not use undiluted bleach or any
products containing chlorides as they
can permanently damage the steel.
Extra care should be taken when cook-
ing food in salted water. Some foods
are corrosive - eg; vinegar, fruit juices
and especially salt - they can mark or
damage stainless steel if they are left
on the surface. Turn off and wipe any
spillage immediately, taking care to
avoid skin contact with any hot surface
or spillage.
Sharp objects can mark the surface of
stainless steel, but marks will become
less noticeable with time.
To maintain the finish of the stainless
steel, or to remove any greasy marks,
wipe the stainless steel surface sparingly
with a minimum
amount of Baby Oil
and kitchen paper.
Do not use cooking oils, as these may
contain salt, which can damage the
stainless steel surface.
41
CARE & CLEANING
Pull out to clean