Filter
Top Products
Space for
THIS APPLIANCE MUST NOT BE INSTALLED ON A NON-FIXED RAISED
Fixing
BASE.
To ensure that critical air gaps are maintained under the product, we recommend
that this product is mounted on a solid base and that the feet do not sink into any
carpet or soft flooring.
The cooker is designed to slot between standard kitchen units spaced a
minimum 500mm apart. The clearance either side need only be sufficient to
allow the cooker to be withdrawn for servicing.
It can be used with cabinets on either side but for a minimum distance of 400mm
above hotplate level allow a side clearance of 60mm between the appliance
and any wall, partition or tall cupboard. It can also be used in a free standing
position.
Allow a minimum distance of 750mm from the hob surface to the underside of
any overhead combustible surface such as overhanging cabinets.
Your cooker is heavy, so be careful when moving or positioning it. Do not try
to move the cooker by pulling on the doors or handles.
To avoid damage to surrounding units a 10mm gap should be left between
the appliance and the units. If this is not possible, a kit (part number 01 25552 00)
may be ordered from Customer Care which will protect the units.
For models with side opening doors, we recommend a side clearance of 60mm
between the cooker and any side wall to allow the door to be opened fully.
Whatever the position, remember to leave enough room for the cooker to be
pulled out for cleaning and service.
Movement of your cooker is most easily achieved by lifting the front as follows
and pulling forwards. Open the Grill door and the Conventional Oven door
sufficiently to allow a comfortable grip on the underside front edge of the oven
roofs, avoiding any grill elements or oven interior furniture. Take care not to
damage any floor coverings.
If a cooker hood is to be fitted, refer to the manufacturer's instructions regarding
fixing height.
65 mm Min
r
=
750 mm Min
_ 65 mm Min
o.
_ 500 mm Mm
WARNING
The use of a gas cooker results in the production of heat and moisture in the room in which
it is installed. Ensure that the kitchen is well ventilated; keep natural ventilation holes or install
a mechanical ventilation device (mechanical cooker hood)
Prolonged intensive use of the appliance may call for additional ventilation, for example
opening of a window, or more effective ventilation, for example increasing the level of mechanical
ventilation where present.
Connecting to
This appliance is designed not to project in front of standard 600mm
5