Filter
Top Products
Belshaw Bros., Inc. 1750 22
nd
Ave. S. Seattle, WA 98144 Phone 206-322-5474 Fax 206-322-
5425
10 MN-1126EN 618L, 624, and 634 Electric Fryers
THE FRYER WILL NOT TURN ON OR HEAT
Possible Causes What To Do
The on/off switch is not in the ON position. Move the on/off switch to the ON position. The
on/off switch is located inside the fryer cabinet, on
the right hand side.
The thermostat is not turned on. Turn the thermostat knob to a setting that is high
enough to make the “Heating” pilot light come on.
The high-temperature limit control switch has
been tripped.
Press the red reset button on the back of the heater
head.
WARNING
Before doing any of the following, turn off the
machine and allow the shortening to cool.
The primary power distribution circuit breaker
has been tripped.
Flip the circuit breaker. The circuit breaker is
visible through an access cutout in the electrical box.
(The electrical box is inside the cabinet, in the back.)
A fuse is blown. Replace the fuse.
THE HEATING ELEMENTS FAIL TO MAINTAIN THE PROPER
TEMPERATURE
Possible Causes What To Do
WARNING
Before doing any of the following, turn off the
machine and allow the shortening to cool.
The thermostat is out of adjustment. Re-calibrate the thermostat. See Appendix B,
“Electrical Components.”
The thermostat is defective. Replace the thermostat.
Sediment has accumulated around the
thermostat bulb.
Remove the shortening from the fryer, as explained
in Section 3, “Cleaning.” Remove the sediment
from the thermostat bulb.