Filter
Top Products
Belshaw Bros., Inc. 1750 22
nd
Ave. S. Seattle, WA 98144 Phone 206-322-5474 Fax 206-322-
5425
618L, 624, and 634 Electric Fryers MN-1126EN 11
THE HEATING ELEMENTS WILL NOT HEAT
Possible Causes What To Do
The fryer’s circuit breaker has been tripped. Press the red reset button on the back of the heater
head.
The high-temperature limit control switch has
been tripped.
Press the red reset button on the back of the heater
head.
WARNING
Before doing any of the following, turn off the
machine and allow the shortening to cool.
The contactor is defective. Replace the contactor.
A heating element is defective. Replace the defective heating element.
The high-temperature limit control is defective. Replace the high-temperature limit control.
The thermostat is out of adjustment. Re-calibrate the thermostat. See Appendix B,
“Electrical Components.”
The thermostat is defective. Replace the thermostat.