Filter
Top Products
Belshaw Bros., Inc. 1750 22
nd
Ave. S. Seattle, WA 98144 Phone 206-322-5474 Fax 206-322-5425
20 MN-1126EN 618L, 624, and 634 Fryers
FIGURE C-1. 618L FINAL ASSEMBLY.
BILL OF MATERIAL BILL OF MATERIAL
ITEM QTY. PART NO. DESCRIPTION ITEM QTY. PART NO. DESCRIPTION
1 1 or 618-1042 or Pre-Wire Panel Assembly–U.L. 28 1 624-40 Drain Nipple
1 or 618-1043 or Pre-Wire Panel Assembly–CSA and
208/236 Volt Export
29 1 618L-98 Drain Valve Extension Knob
1 or 618-1044 or Pre-Wire Panel Assy.–440/480 Volt,
Transformer (Shown) (See Fig. B-2)
30 1 618L-516 Extension Rod Assembly
1 618-1048 Pre-Wire Panel Assembly–380 Volt
Export
31 1 FT100-50 Set Collar
2 1 618-161 Electrical Box Cover 32 1 -------- 1” Plastic Insulating Bushing
3 1 or 618L-1044
or
Cabinet Assembly–Painted 33 1 618-128 Label–Ground
1 618-1044SS Cabinet Assembly–Stainless Steel 34 1 618-131 Ground Lug
4 1 618-540 Electrical Box Assembly 35 1 -------- 1” EMT Locknut
5 1 618L-103 Label–”Drain Valve” 36 1 MDD-459 Label–”Warning”
6 1 EP18/24-
140
Label–”Belshaw” 37 1 618L-105 Label–”Warning,” Cutter Mounting
7 3 618-116 Label–”Caution–Hot” 38 4 624-143 Adjustable Leg
8 2 634-619 Bracket Plate Assembly
9 1 618-17 Door Knob
FASTENERS
10 2 634-63 Cutter Column Mounting Bar Spacer
ITEM QTY. DESCRIPTION
11 1 634-59 Heater Head Mounting Bracket–L.H. A 1 8 x 3/8 Slotted Round-Head Sheet Metal Screw
12 1 634-75 Bracket Sleeve B 8 1/4-20 x 5/8 Hex-Head Machine Screw
13 1 634-60 Heater Head Mounting Bracket–R.H. C 1 10-24 x 1-1/4 Socket-Head Cap Screw
14 1 618L-1515-
240
Heater Head Assembly–208/240 Volt
(See Figure B-3)
D 2 10-16 x 7/8 Hex Washer-Head Tek Screw
1 618L-1045 Heater Head Assembly–208/240 Volt,
CSA and Export (See Figure B-3)
E 2 10-16 x 5/8 Hex Washer-Head Tek Screw
1 618L-1023 Heater Head Assembly–380/440 Volt,
Export (See Figure B-3)
F 6 10-16 x 1/2 Hex Washer-Head Tek Screw
1 618L-1039 Heater Head Assembly–480 Volt,
Domestic (See Figure B-3)
G 8 10-24 x 3/8 Slotted Round-Head Machine Screw
15 1 -------- 1” Sealtite Conduit H 1 8-32 x 1-1/8 Slotted Truss-Head Machine Screw
16 1 -------- 1” x 90° Sealtite Connector J 1 8-32 x 1/4 Slotted Round-Head Machine Screw
17 1 618L-23 Drain Tray Hinge Shaft K 1 1/4-20 x 1/4 Socket-Head Flat-Point Set Screw
18 1 618-37 Drain Tray Support Rod L 1 1/4-28 x 1/4 Socket-Head Flat-Point Set Screw
19 1 618L-
1003SS
Drain Tray Assembly M 6 5/16-18 Hex Nut
20 1 618L-7 Frying Screen N 7 1/4-20 Hex Nut
21 1 624-38 Drain Tray Support Rest–Rear P 9 10-24 Hex Nut
22 1 624-39 Drain Tray Support Rest–Front R 6 5/16 Flat Washer
23 1 -------- Snap Bushing (Heyco #2087) S 3 #10 Flat Washer
24 1 -------- 1-1/4” to 1” Reducing Washer T 4 1/4 Flat Washer
25 2 -------- Hole Plug (Heyco #2674) U 1 #8 Internal Tooth Lockwasher
26 1 618L-
1000SS
Kettle Assembly V 11 1/4 Internal Tooth Lockwasher
27 1 624-11 Drain Valve W 8 #10 Internal Tooth Lockwasher