Filter
Top Products
Continuous Feed Food Processors
Berkel M2000 / M3000
INSTALLING & REMOVING
FEED HOPPER LID
WARNING: Always ensure that the
ON/OFF switch (C) is in the OFF
POSITION prior to installing or removing
accessories.
REMOVING THE FEED HOPPER LID
Disengage the magnetic toggle lock (A) and
open the feed hopper lid to the upright
position (B). Slide feed hopper lid away
from the food processor body.
INSTALLING THE FEED HOPPER LID
To install the feed hopper lid, hold the feed
hopper lid in the upright position and line
up the long hinge pin (C) with the pin hole
(D). Slide feed hopper lid towards the
food processor base until both hinge pins
are fully engaged. Close feed hopper lid.
6