Filter
Top Products
29
MAINTAININGYOURRANGE
REPLACINGTHEOVENLIGHTBULB
WARNING!
Disconnectpowerbeforeservicingunit.
To replace the oven light bulb, unscrew the
protectioncapthatprojectsoutinsidetheoven.
Spare bulbs are available at factory‐authorized
partsresellerslistedonpage4.
Alternatively use commercial bulbs type [list
SPECS]
COOLINGFANFAILURE
Bertazzoni ranges are equipped with a cooling
fan.Thefan starts operating eachtime the oven
knobisonapositiondifferentfrom0(zero).
The fancirculates the air between the control
panel and the oven door, allowing the control
panel and the oven door
to remain cool while
cooking.
Malfunctionofthecoolingfanisindicatedbythe
FANFAILURElightsituatedattheleftsideofthe
control panel. If the light is on, turn off all
burnersassoonaspossibleandcallthecustomer
service hotline to schedule service by a factory
‐
trainedprofessional.
CLEANINGYOURRANGE
ATTENTION!
Neveruseabrasivecleaners!
Scratchesonthestainlesssteelsurfacesare
permanent.
Donotcleantherangewhenhot!
Cleaning after installation: use a stainless steel
cleaning product or wipe to eliminate the glue
residues of the blue protection film after
removal.
Cleaning the worktop: periodically clean the
burner
heads,thecastironpansupportsandthe
burner caps using warm water. Remove burned
food andfat residueswi th arubber spatula. If
food residue prevent the smooth operation of
the control knobs, call the customer servce
hotline to schedule service by a factory‐trained
professional.
Cleaning stainless steel:
for best results use a
stainlesssteelcleanerproductwithasoftsponge
or wipe. Alternativelyuse asoft sponge or cloth
withawarmsoapandwatersolution.Neveruse
abrasivepowdersorliquids!
Cleaning the burner caps: lift the burner caps
fromtheburnerheadsandwashthem
inawarm
soap and water solution. Dry thoroughly before
usingthemagain.Beforereinstallingthemonthe
burner head, check that the gas flow holes are
not clogged with food residues or cleaning
productresidues.
Cleaning Enamel: enamelled parts should be
cleaned frequently with awarm soap and water
solution applied
with a soft sponge or wipe.
Never use abrasive powders or liquids! Do not
leave acid or alkaline substances on the
enamelled parts (such as vinegar, lemon juice,
salt,tomatosauce,etc.).Usearubberspatulato
removefatresidues.
Cleaningglassdoor: cleantheglass usinganon‐
abrasive
sponge or wipe with a warm soap and
warm water solution. Use a rubber spatula to
removefatresidues.
Cleaning the inside of the oven glass: Oven
feature is the ability to remove the inner glass.
Afteryouopenthedoorcompletelyandlockthe
hinges (fig. 1) unhook the engagements
shows
the figure (2‐3) lift and remove the inner glass
(fig. 4) and then clean thecrystal. Such an
operation is to be performed in cold oven and
with a damp cloth, taking care not to use