Filter
Top Products
•••• www.beverage-air.com• Pg. 11 ••••
LID REMOVAL
If lids must be removed:
1 - Stand in front of the freezer (Fig.1)
2 - Assure that the lower lid is totally closed to the left side of the freezer (Fig.2)
3 - To remove the top lid, run it open to its maximum, handling it by both sides push it to the back
(Fig.3). This allows the lid to get out from the front rail where it runs, then remove it pulling the lid out
from the rear rail (Fig.4). Handle the lid carefully and place it in a straight safety place (see figure 5)
4 - Repeat step number 3 for removing the lower lid.
5 - To install the lids again, reverse the previous steps starting with the lower lid.