Filter
Top Products
How To Put It Together
Other Components
How to use this guide
This User’s Guide has been designed
to help you get the utmost satisfaction from
your BISSELL QuickSteamer Lightweight Deep
Cleaner. You’ll find assembly and operating
instructions, safety precautions, as well as
maintenance and troubleshooting instructions.
Please read this Guide thoroughly before
assembling your cleaner.
Pay particular attention to the product
diagram, assembly instructions, and part names.
Locate and organize all parts before assembly.
Familiarize yourself with the parts and where they
go. Following this User’s Guide will greatly
enhance your ability to get the most performance
from your BISSELL QuickSteamer for many years.
Your QuickSteamer comes in two, easy to
assemble components.
Detachable Handle
Lower Body
Clean Water Tank - holds 1/2-gallon of hot water
cleaning solution.
Dirty Water Tank - holds 1/2-gallon of dirty water.
Power Cord - Secure Power Cord around upper and
Lower Cord Wraps, and secure Plug to Cord with
molded clip
Your QuickSteamer is packaged as two primary
components - the Lower Body and the Handle
Assembly. Select QuickSteamer models also come
with a Bare Floor Tool.
Your QuickSteamer assembles easily in two quick
steps. The only tool you’ll need to assemble your
cleaner is a Phillips head screwdriver.
Refer to Assembly Diagram on page 4
Attach Handle to Lower Body
Slide Handle Assembly (with attached
Quick Release Cord Wrap
™
) down into
Lower Body until it will go no further.
Secure with screw
Secure by placing one (1) Phillips head
screw (supplied) into rear of Handle
Assembly. Tighten with screwdriver
until secure.
1.
2.
1.
2.