Filter
Top Products
Plan activities to give carpet time to dry.
Remove easily moved furniture (chairs, lamps,
coffee/cocktail tables, etc.) from room if needed.
Vacuum carpet thoroughly.
Decide where to begin — and end — your job. Clean
in 3’ X 4’ sections, starting in areas farthest from exit.
Plan to leave a path open to empty soiled water and
refill cleaner.
Carpeting will dry in three to four hours, depending on
carpet style and air circulation in room. A floor fan
speeds drying.
Replace furniture on damp carpeting by placing waxed
paper under legs until floor dries completely.
Remove the Clean Water Tank by lifting it straight up,
then away from the Lower Body.
Using the Formula Measuring Cap, add two (2) capfuls
of BISSELL
®
Fiber Cleansing Formula
™
to the Clean
Water Tank. Add 1/2-gallon of hot (NOT boiling) tap
water. Fill only to fill line – do not overfill.
Replace & turn Formula Measuring Cap clockwise until
secure.
Place Clean Water Tank on Body.
Rotate Quick Release Cord Wrap
™
and plug in.
Turn Power Switch [back of Lower Body] to ( ) ON.
If cleaner starts when first plugged in, switch cleaner
OFF ( ) until ready for use.
How to use your BISSELL QuickSteamer
How to begin
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
Getting ready
WARNING:
Use only BISSELL Fiber
Cleansing Formula
™
or
Floor Cleansing Formula
™
in your QuickSteamer.
™
Use of cleaning formulas
that contain lemon or
pine oil may damage this
appliance and void warranty.
Chemical spot cleaners or
solvent-based soil removers
should not be used. These
products may react with the
plastic materials used in
your QuickSteamer,
™
causing cracking or pitting.
Formula
Measuring
Cap
Unscrew to Remove
Power
Switch
Tip:
Always vacuum
thoroughly before
you deep clean.
If possible, move
larger furniture to
an area you will
not be cleaning.
1.
6.