Filter
Top Products
-6-
English
As a Slicer / Shredder
Carefully fit the required blade (18, 19, 20, 21, 22 or
23) to the blade carrier (17) so that the cutting
edges are in line with the smooth face of the blade
carrier.
Place the chopping blade spindle (16) onto the
metal pin in the centre of the bowl then place the
holder & blade over the hexagonal portion of the
spindle.
Re-fit the bowl lid, making sure the lid seal (10) is in
place and place the bowl pusher (11) into the inlet
chute in the bowl lid (9).
The bowl pusher should be left in place during use
to prevent spills.
Place the assembled bowl in the recess in the
motor housing (1).
Rotate the swivel head back towards the motor
housing & push it down until it latches in place.
Connect the appliance to a suitable electrical
supply.
Rotate the speed control (3) to the desired speed.
Remove the pusher from the inlet chute & add the
ingredients through the inlet chute, using the pusher
to gently press them onto the cutting blade.
Note: Never insert fingers or allow loose clothing,
jewellery, hair, etc. to enter into the inlet chute.
Add ingredients until the bowl is full or sufficient
ingredients have been processed then rotate the
control back to 0 to turn the appliance off.
Press the swivel head release button (5), guiding the
swivel head (2) as it lifts.
Lift the bowl from the appliance.
Remove the lid then take the blade carrier & spindle
from the bowl before transferring the ingredients to
a suitable container.
The blades can be removed from the carrier by
carefully pushing it in the opposite direction of
assembly.
Note: The large French fry blade (25) has a unique
carrier (23). This cannot be used for any other
blade. The large French fry blade & carrier are used
in the same way as the other carrier & blades.
As a Blender
Carefully fit the upper jug blade (29) over the lower
jug blade (28) rotating the blades in a clockwise
direction so they lock together.
Note: The blades should be at right-angles to each
other, forming an X-shape.
Remove the jug lid (30) and fit the blades onto the
metal pin in the centre of the bowl before replacing
the lid, making sure the seal (32) is in place.
Ingredients can be added to the jug while the lid is
off, or by inserting them through the hole left when
the jug lid cap (31) is removed.
Note: Never insert fingers or allow loose clothing,
jewellery, hair, etc. to enter into the inlet.
Press the swivel head release button (5), guiding the
swivel head (2) as it lifts.
Note: The swivel head cannot be raised if the speed
selector (3) is in any position other than “OFF”.
Place the assembled jug in the recess in the motor
housing (1).
Rotate the swivel head back towards the motor
housing & push it down until it latches in place.
Connect the appliance to a suitable electrical
supply.
Whisking Guide
Ingredients Quantity Speed Setting
Eggs 4 1 – Max
Cake mix 800g 8 – Max
Cream 500g 8 - Max
Slicing / Shredding Guide
Ingredients Quantity Speed Setting
Carrots 500g 1 - 3
Radish 500g 1 – 3
Squash 1,000g 1 – 3
Cucumber 1,000g 1 – 3
Cheese 500g 1 – Max
Potato 500g 1 – 3