Filter
Top Products
-7-
English
Technical data FX1200
Voltage V 220-240
Power input W 1,000
Cable length m 1.0
Container size l Processor Bowl 2.2lt
Blender Bowl 1.5lt
Weight kg 9.92Kg
Rotate the speed control (3) to the desired speed
until the ingredients are blended as required then
rotate the control back to 0 to turn the appliance off.
The pulse button (4) can be used instead of the
speed control.
Press the swivel head release button (5), guiding the
swivel head (2) as it lifts.
Lift the bowl from the appliance.
Remove the jug lid then carefully remove the spindle
& blades & transfer the ingredients to a suitable
container.
The blades can be removed from the spindle
individually, rotating them in an anti-clockwise
direction.
As a Juice Extractor
Place the juice extractor (33) over the metal pin in
the centre of the jug (27) & fit the juice extractor lid
(34), making sure the seal (32) is in place.
Place the juice extractor pusher (35) into the inlet
chute in the juice extractor lid (34).
The pusher should be left in place during use to
prevent spills.
Place the assembled juicer in the recess in the motor
housing (1).
Rotate the swivel head back towards the motor
housing & push it down until it latches in place.
Connect the appliance to a suitable electrical supply.
Rotate the speed control (3) to the Maximum speed.
Remove the pusher from the inlet chute & add the
ingredients through the inlet chute, using the pusher
to gently press them into the juicer.
Note: Never insert fingers or allow loose clothing,
jewellery, hair, etc. to enter into the inlet chute. If
ingredients jam in the juicer, use the pusher.
Note: If it is not possible to clear a blockage using
the pusher, switch off & disconnect the appliance
from the electrical supply, then raise the swivel head
& open the jug to clear the blockage manually.
Add ingredients until the jug is full or sufficient
ingredients have been processed then rotate the
control back to 0 to turn the appliance off.
Press the swivel head release button (5), guiding the
swivel head (2) as it lifts.
Lift the bowl from the appliance.
Remove the lid & juicer before transferring the
ingredients to a suitable container.
Maintenance
Your Black & Decker tool has been designed to
operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance or
cleaning of the tool, disconnect the appliance from
the power supply.
Ventilation slots should be cleaned occasionally with
a clean, dry paint brush.
Cleaning
The motor housing (1) should be cleaned with a
clean damp cloth only.
The stainless steel blades can be cleaned in a
dishwasher.
Alternatively, they can be washed in warm soapy
water. Rinse with clean water and dry thoroughly with
a dry soft cloth.
All other parts should be washed in warm soapy
water. Rinse with clean water and dry thoroughly with
a dry soft cloth.
Note: Do not use abrasives or chemical cleaners on
any part of this appliance.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker
product needs replacement, or if it is of no further use to
you, do not dispose it off with other household waste.
Make this product available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal
waste sites or by the retailer when you purchase a new
product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage
of this service please return your product to any
authorised repair agent who will collect them on our
behalf. You can check the location of your nearest
authorised repair agent by contacting your local Black &
Decker office at the address indicated in this manual. A
list of authorised Black & Decker repair agents and full
details of our after-sales service and contact are
available on the Internet at: www.2helpU.com