Filter
Top Products
5
ENGLISH
• Never let the appliance operate unattended.
• Never reach into the jar with your fingers or
an object while the appliance is running.
• Only remove the jar after you have switched
the appliance off and any moving parts have
stopped.
• Do not touch the cutting blades.
• Keep any loose clothing or long hair away
from the feeding tube and any moving parts.
• Care shall be taken when handling the sharp
cutting blades, emptying the bowl and during
cleaning.
• Do not immerse the appliance, cord set or
plug in liquids.
• Position cord so it does not hang over the
edge of worktops & cannot be caught
accidentally or tripped over.
• Caution: Ensure the Blender is turned off
before removing from the stand.
Safety of others
• This appliance is not intended for use by
persons (including children) with reduced
physical sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
After use
• Remove the plug from the socket before
leaving the appliance unattended and before
changing, cleaning or inspecting any parts of
the appliance.
• When not in use, the appliance should be
stored in a dry place. Children should not
have access to stored appliances.
Inspection and repairs
• Switch off the appliance before cleaning,
changing accessories or approaching parts
which move in use
• Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to switches and
any other conditions that may affect its
operation.
• Do not use the appliance if any part is
damaged or defective.
• Do not use the appliance if the blade is
damaged.
• Have any damaged or defective parts
repaired or replaced by an authorised repair
agent.
• Before use, check the power supply cord for
signs of damage, ageing and wear.
• Do not use the appliance if the power supply
cord or mains plug is damaged or defective.
• If the power supply cord or mains plug is
damaged or defective it must be repaired by
an authorised repair agent in order to avoid a
hazard. Do not cut the power supply cord
and do not attempt to repair it yourself.
• Never attempt to remove or replace any
parts other than those specified in this
manual.
Electrical safety
Before use, check that the mains voltage
corresponds to the voltage on the rating plate.