Filter
Top Products
Installation
6
Oven Assembly
Before assembly and installation of the oven,
check that all components have been received. In
addition to the oven, legs, decks and/or other ac-
cessories may be required.
Single Sections
D
4” (10 cm) legs are shipped inside the oven,
packed in a separate carton.
D
The decks are individually packaged and se-
cured to the oven back.
Double Sections
D
4” (10 cm) legs are packed in lower sections.
D
Spacer is shipped attached to the upper sec-
tion.
D
Securing plate to attach units together is lo-
cated in the upper section.
D
The decks are packaged with each section.
LEG ATTACHMENT
1. Tip bottom oven section backward.
2. Attach each of the four legs into the nuts se-
cured in the oven bottom.
3. Tighten each leg and adjust the leg feet to
approximately the same height.
NOTE: Final leg fet adjustment will be re-
quired during the leveling operation.
Figure 3