Filter
Top Products
Installation
6
Oven Assembly
LEGS
1. Lay the oven on it ’s b ack. Screw one leg into
each of the four holes located on the bottom
of the oven chamber.
2. Tighten the hex nut at the top of each leg.
3. Lift the oven upright onto the legs.
Bottom of
Oven
Figure 3
OVEN STAND WITH CASTERS
1. Attach each leg to the stand frame with a lock
washer and nut. DO NOT tighten completely.
2. Position the shelf between the legs with the
smooth surface facing the top of the stand.
Aligntheshelfwiththeholesineachleg.At-
tach the shelf to each leg w ith a nut and bolt.
3. Tighten the bolts installed in step 1.
4. Place the oven onto the stand. Bolt the oven
to the stand from underneath.
Top of
Stand
Leg
Stand
Frame
Shelf
Figure 4