Blodgett DFG-100 Convection Oven User Manual


 
Installation
5
Oven Assembly
NSF BOLTS
These bolts are required by NSF to block any ex-
posed hole on the back of an oven. This includes:
D
any unit, singl e or stacked, without a back panel.
D
any holes in stacked units not used for mount-
ing stacking brackets.
1. Locate the 5/16” bolts that were s hipped with
the oven.
2. InstalltheboltsasshowninFigure3.
Double Stacked Units Units without Back Panels
Figure 3