Filter
Top Products
ENGLISH
Use & Care Manual
10
When the cooktop is connected to the electrical voltage
supply all lights and digits turn on to indicate a proper
activation. This operation will be completed after few
seconds, the control turns off automatically. Now the
cooktop is ready for operations.
are locked (see that the lock led is on and turns off after
a few seconds).
single zone available for selection.
All the displays show power level “0”, if no actions are
performed the control shuts down again after about 10
seconds.
desired zone: the HOT SURFACE (ref.3) indication
5b
5a
4
1
2
3
Touch the slide bar to set the power level (levels 0 to
touching the desired value. If your cooktop model has
power level (ref.7).
The display (ref.4) show the power level, updated in
real time.
After a 5 seconds time-out the value is accepted, the
steady.
expires.
7
Figure. 7
Once a cooking zone has been selected, touch the
Power Scale (ref.9) then set the power level in the
usual way.
8
Figure. 8
The control uses only the 15% of the available power,
divided in 0 to 9 steps with a better accuracy.
Keep in mind that power level 9 in this special mode
correspond exactly to level 4 in the standard range.
in order to disable the Low Power Scale and restore the
standard one, without switching off the zone.
Pay attention: the level remains the same but the
power increases.