Filter
Top Products
CLEANING INSTRUCTIONS
PROCEDURE: Clean Coffee Brewer
PRECAUTIONS: Disconnect brewer from electric power.
Allow brewer to cool.
FREQUENCY: Daily
TOOLS: Mild Detergent, Clean Soft Cloth or Sponge
Bristle Brush, Bottle Brush
1. Disconnect brewer from electric power.
Allow brewer to cool before cleaning.
2. Remove any cup, then remove drip tray and cup grid.
3. Remove and empty pod drawer.
4. Unlatch pod holder and slide brew tray fully forward. Remove
and discard any used pod.
5. Wipe both top and bottom pod holders, brew nozzle and the
area around the pod holder with a soft clean cloth or sponge
moistened with warm water and a mild detergent. Rinse by
wiping with a clean cloth moistened with clean water.
6. Wash the pod drawer, drip tray and cup grid in a sink using
warm water and a mild detergent. Rinse with clean water
and allow to air dry.
7. Wipe the exterior of the brewer with a soft clean cloth or
sponge moistened with clean water.
8. Reinstall the pod drawer, then reinstall the drip tray and cup
grid.
9. Slide the tray fully to the rear. In order to prevent an
unintended brew, do not lock the pod holder.
Procedure is complete
CAUTION:
BURN HAZARD
Brewing and serving
temperatures of coffee and tea
are extremely hot.
Hot beverage will cause
serious skin burns.
CAUTION:
SHOCK HAZARD
DO NOT submerge or immerse
brewer in water. DO NOT pour,
spill or splash water onto, into or
over any internal component.
IMPORTANT:
DO NOT use steel wool, sharp
objects, or caustic, abrasive or
chlorinated cleansers to clean
the brewer.
Fig. 6 Cleaning
10