Filter
Top Products
OPERATION (continued)
15
CONVECTION OVEN OPERATING INSTRUCTIONS
A. MANUAL COOK MODE
1. Set the OVEN POWER SWITCH (C.01) to ON. The OVEN
POWER ON INDICATOR (C.03) will glow when the switch is ON.
2. Rotate OVEN TEMPERATURE CONTROL knob (C.07) until the
desired cooking temperature is displayed on the READOUT
(C.05A). The oven will begin heating, and the temperature digits
will flash, until the set temperature is reached.
3. Rotate OVEN TIME CONTROL knob (C.06) until the desired time
is displayed on the READOUT. The digits and colon will flash,
indicating that time has been set but the timer is not started.
4. Load product in the oven. Press START TIMER key (C.08). The
timer digits count down and the colon (only) flashes during the
timer period.
5. At the end of the timer period, an audible alarm will sound. Press
CANCEL key (C.11) to silence the alarm.
SUGGESTION: For best baking results when making baking soda
biscuits, use rack positions 2, 5 & 8 ( where rack position 1 is the top
rack). When baking one pan: use rack 5 (center rack); when baking
2 pans: use racks 2 & 8; when baking three pans: use racks 2, 5 & 8.
B. PROGRAM COOK MODE
1. Five (5) programmable keys (C.10) are provided for presetting
frequently used time / temperature combinations. To set the
program:
a. Press and hold the appropriate PGM key.
b. While holding the PGM key, turn the TIME and TEMP knobs
until the desired time and temperature is displayed on the
readout.
c. Release the PGM key to store the displayed time and temp in
memory.
2. The program for any PGM key can be recalled by momentarily
pressing that PGM key.
3. To start a programmed cook cycle, press the appropriate
PGM key and the START TIME key. Once the cook cycle
has started, the TIME and TEMP knobs are locked out to
prevent accidental re-programming.
4. The actual oven temperature may be recalled at any time
by pressing the ACTUAL TEMP key (C.09).
5. At the end of the timer period, an audible alarm will sound.
Press CANCEL key (C.11) to silence the alarm.
CAUTION:
Hot Surface
Exposed surfaces can be hot
to the touch and may cause
burns.
CAUTION:
Electrical Shock
Hazard
DO NOT splash or pour water
onto control panel or wiring.
CAUTION:
Electrical Shock
Hazard
DO NOT operate the unit if
the keypad is torn or broken.
C.01 C.02
C.03
C.04
C.05
C.06
C.07
C.08 C.09
C.10
C.11
C.05
A
C.05
B