Filter
Top Products
6
BISTRO
plug of your appliance, have the power point changed by
a licensed electrician.
USING FOR THE FIRST TIME
– Carefully unpack the toaster and remove all of the
packaging material.
– Before using for the first time, to eliminate the new
smell, operate the toaster without bread inside for at
least 5 minutes. Ensure there is plenty of ventilation in
the room.
– A short power-supply cord should be used to reduce the
risk resulting from becoming entangled in or tripping
over a longer cord.
– Longer (detachable power-supply cords or) extension
cords are available and may be used if care is exercised in
their use.
– If an extension cord is used,
1) The marked electrical rating of the extension cord
should be at least as great as the electrical rating of the
appliance and
2) The longer cord should be arranged so that it will not
drape over the counter top or table top where it can be
pulled on by children or tripped over unintentionally.
USING THE TOASTER
– Ensure control lever (D) is raised.
– Plug (K) into a suitable mains supply socket.
– Insert up to two slices of bread into toasting slots (E).
– Turn the variable browning setting knob (A) dial to
required setting. (1=lightest, 5=darkest)
– Press down control lever (D) until it locks.
– Once the chosen level of browning has been reached, the
toast will automatically raise ready for removal from the
slots.
– If the first slices are not browned sufficiently, select a
higher setting (A) next time.
– If you want to interrupt the toasting process, press the
stop button (C) at any time to stop the toasting process.
USING THE DEFROST BUTTON
– When using bread straight from the freezer set the
browning control to the required position and press
down the control lever (D) until it locks. Press within 2
sec. the defrost button (B). The defrost light will remain
on while the defrost function is in use, and toasting time
will be automatically extended. Always keep an eye on
the bread for any signs of burning.
6
BISTRO