Filter
Top Products
STOP THE MACHINE · START THE MACHINE
8
START THE MACHINE
1. Insert the power cord into a
120V AC power socket. Ensure
that the water control knob is in
the CLOSE position.
2. Start the unit by pressing
the POWER button. All small
round lights will illuminate and
flash 3 times.
3. Then the red power light will
start flashing as long as the
machine is heating up.
4. As soon as the red light has
stopped flashing you can start
using the espresso machine.
STOP THE MACHINE
Stop the unit by pressing the
POWER button.
SUSPEND MODE
If you do not use the unit for
more than 30 minutes it enters
suspend mode:
The POWER button will change
color from red to orange. The
heater temperature will go
down to half of that required for
the READY STATE.
Back to READY STATE: Press the
POWER button.