Filter
Top Products
FILLING THE WATER RESERVOIR
7
FILLING THE WATER RESERVOIR
1. Remove the water reservoir
and open the lid.
2. Fill the water reservoir with
water. Tip: The water reservoir
should always be filled with
fresh tap water or use your
favourite mineral water.
3. Replace the water reservoir
firmly into the unit and close
the lid.
Alternatively you can simply
open the lid of the water
reservoir and fill with cold water
without removing it from the
machine.
THE WARMING PLATE
1. Pre-heat your espresso cups:
place them upside down on the
warming plate.
2. Close the top cover while
pre-heating the cups.
PLACING A MINERAL WATER BOTTLE
1. Remove the water reservoir
from the machine and put it
elsewhere.
2. Place the cover on the bottle
holder.
3. Place the adapter on the
water bottle.
4. Turn around the bottle and
place it firmly into the unit.
Note: When using a water
bottle small amounts of water
may drop out of the bottle
adapter. This allows air flow so
that the water pumps smoothly.