Filter
Top Products
4
BISTRO
INSTALLATION
– Place the appliance on a stable, horizontal surface that
is neither hot nor near a heat source. The surface must
be dry. Keep the appliance and cord out of the reach of
children.
– Check that the voltage indicated on the rating label of the
appliance corresponds to the local mains voltage. Connect
the appliance only to a properly earthed wall outlet with
an output rating of at least 6 A. (Use a residual current
device (RCD) – please contact a qualified electrician for
advice.) The wall outlet must be easily accessible while
the appliance is in use in case of emergency. The manu-
facturer is not responsible for accidents caused by poor or
inexistent grounding of the appliance.
– If the plug provided with the appliance is incompatible with
the wall outlet, have it changed by a qualified electrician.
PARTS OF THE BLENDER STICK
1 Motor unit
2 Blender wand
3 Blender head
4 Low-speed button
5 High-speed button
6 Mains cord
7 Multiblade
8 Whisk
9 Beater
10 Lidded beaker
11 Tool for removing the attachments
SPECIAL ADVICE
MAINS CORD
– If care is taken, a mains extension cable can be used.
– If a mains extension cable is used, its electrical rating must
at least match that of the appliance; if the appliance is
earthed, the extension cable must be a three-core earthed
cable. The lengthened cable must not be allowed to hang
over the edge of the table or counter: children must
not be able to pull on it, and it must not be allowed to
present a trip hazard.
– For USA – Canada
This appliance has a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock, this
plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not modify
the plug in any way.