Filter
Top Products
H
35
Facia Assembly
Fig. 9-5
Fig. 9-4
Fig. 9-6
Fig. 9-7
1
2
3
1
2
With the Facia Assembly removed from
the unit, it can be further separated into
two assemblies.
To separate, release the four locking
tabs and bring the Facia Frame up from
the Facia Console, Fig. 9-4.
The Facia Frame houses three
components:
Item 1,On/Off Switch.
Item 2,Door Latch Assembly.
Item 3,Control Unit.
Note: The Facia Console or Program
Buttons can be replaced at this
time.
ON/OFF SWITCH REMOVAL:
Bend the single tab up, item 1.
Then slide the switch up and out from
the frame, and remove the Locking
Lever, item 2.
Note: The Locking Lever, item 2,
switches the unit off when the
door is opened during operation.
DOOR LATCH ASSEMBLY REMOVAL:
Bend the two tabs up and slide the
Latch down.
CONTROL UNIT REMOVAL:
Press in on the three locking tabs and
bring the Control Unit out from the
Console Frame.
Note: Always reset the new Control Unit
by pressing the appropriate
cancellation buttons, see Section 2.