Filter
Top Products
11
3.Turn the rotary selector to set the cooking time.
4.Press the 0 button.
The time-setting options menu closes.
5.If the operation has not yet started, press the n button.
The time starts counting down.
The cooking time has elapsed
A signal sounds. The oven stops heating. The cooking time is
at
‹‹:‹‹. You can cancel the signal earlier by pressing the 0
button.
Cancelling the cooking time
Press the
0 button to open the menu. Using the X button,
switch to the [
r] cooking time and use the rotary selector to
set the cooking time to
‹‹:‹‹. Press the 0 button to close
the menu.
Changing the cooking time
Press the
0 button to open the menu. Using the X button,
move to the [
r] cooking time and set the cooking time using
the rotary selector. Press the
0 button to close the menu.
Setting a later end time
A later end time can be set for
■ all types of heating
■ a variety of programmes
■ and the cleaning system
Example: you put the dish in the cooking compartment at 9.30.
It takes 45 minutes to cook and will be ready at 10.15, but you
would like it to be ready at 12.45 instead.
Change the end time from 10.15 to 12.45. Cooking starts at
12.00 and finishes at 12.45.
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
Setting a later end time
Prerequisite: a cooking time has already been set. Operation
has not yet begun. The time-setting options menu
0 is
opened.
1.Using the X button, move to the [p] end time .
2.Using the rotary selector, set a later end time.
3.Press the 0 button to close the time-setting options menu.
4.Confirm by pressing the n button.
The oven is in [
p] standby. The end time is shown in the clock
display. As soon as operation starts, you will see the cooking
time counting down.
The cooking time has elapsed
A signal sounds. The oven stops heating.
‹‹:‹‹ is shown on
the clock display. You can stop the audible signal by pressing
the
0 button.
Correcting the end time
This is only possible as long as the oven is in [
p] standby.
Press the
0 button to open the menu. Move to the end time
using the
X button. Adjust the end time using the rotary
selector. Press the
0 button to close the menu.
Cancelling the end time
This is possible, providing the oven is on standby. Select the
menu with the
0 button and move to the end time using
the
X button. Turn the rotary selector anti-clockwise until the
current end time is reached. The cooking time immediately
starts to count down.
Setting the clock
The oven must be switched off before you can set or change
the clock.
Following a power cut
After a power cut [
0] and ‹‹:‹‹ appears in the display. Set
the current time.
1.Press the 0 button.
The selected function [
0] and [‚ƒ:‹‹] appear in the
display.
2.Turn the rotary selector to set the current time.
3.Confirm by pressing the 0 button.
The time appears in the display.
Changing the clock
If you wish to change the clock from summer to winter time, for
example:
1.Press the 0 button.
The time-setting options menu appears.
2.Move to the clock [0]using theX button.
3.Turn the rotary selector to set the current time.
4.Press the 0 button.
The time appears in the display.
Hiding the clock
You can hide the clock. Then it will only appear when the oven
is switched on. For more information, refer to the Basic settings
section.